Mēraparāti un testēšanas ierīces

Pirkuma grozs:

0 vienība(s) - 0.00€

Fluke I30S Strāvmainis

Fluke I30S


Cena: 839.00

ar   bez  PVN

Piegāde: pasūtāms

  • Apraksts

Electrical specifications Specified current range    30 mA to 30A dc, 30 mA to 20 A ac rms Usable current range    5 mA to 30 A dc, 30 mA to 20 A ac rms Crest Factor    1.4" Output sensitivity    100 mV/A Accuracy (at +25 °C)    ± 1 % of reading ± 2 mA Resolution    ± 1 mA Load impedance    > 100 k? Conductor position sensitivity    ± 1 % relative to center reading Frequency range    DC to 100 kHz (- 0.5 dB) Phase shift below 1 kHz    < 2 degrees Temperature coefficient    ± 0.01 % of reading/°C Power supply    9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator Working voltage (see Safety Standards section)    300 V ac rms or dc General specifications Maximum conductor size    19 mm diameter Output connection    Safety BNC connector, supplied with safety 4 mm adapter Output zero    Manual adjust via thumbwheel Cable length    2 meters Operating temperature range    0 °C to +50 °C Storage temperature range (with battery removed)    -20 °C to +85 °C Operating humidity    15 % to 85 % (non-condensing) Weight    250 g Safety standards    BS EN 61010-1: 2001    BS EN 61010-2-032: 2002    BS EN 61010-031: 2002    300 Vrms, Category III, Pollution Degree 2    Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.